I'm buying a site-unseen '97 Jeep Cherokee XJ for $1,500! This thing was owned and garage kept for the last 19 years by a nice, older lady who never abused it and maintained it religiously via the dealership, and the Jeep comes with a stack of service receipts as thick as pea soup. That's the only way I would buy any vehicle with 244,000 miles on the odometer...
Download it here, for free. I found a copy of the 1984 GMC Light Duty Truck Service Manual. It will of course work for Chevrolet trucks, not just GMC, and for years 1981, 1982, 1983, 1984, 1985, 1986 and 1987. It will also mostly work for years 1973, 1974, 1975, 1976, 1977, 1978, 1979 and 1980, though a few things will be differest such as windshield wippers, front sheet metal, interior, etc.
One last task on Project Hank before it's totally complete: take some glamor shots of course!
We're in the home stretch now of Project Hank. Now that the interior is done, I just gotta install all the chrome trim and then it's done! The side molding, wheel arch molding, hub caps, drip rails, new lenses all around, and the side badges.
The time has finally come to do the interior! The interior is getting a full color change to match the new exterior.
There was no way I could afford a pro paint job. I gave myself an allowance of $1500 to restore this truck which included much much more than just a fresh paint job. So an expensive paint job just wasn't in the budget. Then I started looking at alternative methods, like plasti-dip. But when I did the math, a plasti-dip paint job would have cost $400 at least and would not be a real investment into this truck. Of course I could have gotten a dozen spray cans and bombed it, but I wasn't interested in something with basically no quality at all. Then I came across a youtube video of someone painting a small red car with rustoleum and a roller. And it looked great! I started watching and reading more and more. The rolled on version was much harder, shinier, and more durable than with spray cans. I was sold.
The idea is that oil-based enamel paints from your hardware store can be ROLLED onto the vehicle if you thin heavily with mineral spirits and use a high-quality foam roller. The mineral spirits help it level out while it's drying and its supposed to make the paint cure faster so you can wet sand the next day. A glossy, flat, durable (relative to, say, a rattle can paint job) finish can be achieved with a very small amount of money. However, it's very labor intensive.
What I'm about to do is not going to be incredibly popular with the chevy squarebody community, especially the off-road bunch. I'm going to remove the 4" suspension lift and drop it down to stock height. This was the plan all along with this truck. I'm not into mudding. Since buying this truck I tried a few times and it was just alright but the most fun I had off-road I could just as easily achieve with 33" tires and no suspension lift. In addition, the gear ratio in my GM 10 bolt rear end was only 3.42, much too small for 35" tires even with a SBC 350 engine. I live in a hilly area and on several occasions I got in a jam while going up hill in top gear at 30mph, and the truck did not like that. Smaller tires will make it muuuuch easier to drive around town with the Muncie SM465 transmission, although it will lower my highway speed.
In this episode of This Old Truck, I do some more body work and rust repair, I fabricate a licence plate bracket, and I fit the front and rear bumpers to the truck. Follow along this exciting journy of This Old Truck, only on dannix.net! (45 photos)
I'm swapping front clips. Going from the square headlights to the round headlights. Why? Because I like it better, that's why. This is my project, I have a design goal in mind, and this is what I must do to achieve it. I want to turn my 80's truck into a 70's truck, make it more of a classic, more retro. Cooler. Honestly, it's about more than the round headlights. Mainly I want the older style fenders that allow for the really cool chrom trim.
There are no photo-documented tutorials for how to do this swap. None online that I could find. Therefore, I hope this information can be added to the collective knowledge of the squarebody community.
